KS Permaglide® cylindrical plain bearing bush, design PAP ... P-10
Material: Permaglide® KS-P10
Most wind turbine systems have a horizontally-mounted 3-blade rotor. The wind causes the rotor blades to rotate. The mechanical rotary motion is transferred
from the rotor hub to the rotor shaft. The low speeds of the rotor are converted at a ratio of 1:25 by a gearbox for generator operation. The rotor shaft is installed in the hollow shaft of the gearbox in the input stage. The rotor shaft and hollow shaft are connected on one side and rotate synchronously.
KS Permaglide® 10 plain bearings are used as spigot bearings for the rotor shaft in the gearbox of wind turbine systems
The rotor shaft twists as a result of the strong alternating stresses. This leads to micro-movements on the guide parts. Such strained contact points are usually subject to tribo- chemical corrosion.
BEARING WITH KS PERMAGLIDE® P10 PLAIN BEARING BUSHES
With a maintenance-free KS Permaglide P10 plain bearing, tribo-chemical corrosion is prevented and the guide quality of the bearing position is improved. The negative impact from stick-slip is minimised thanks to the low friction coefficient of KS Permaglide P10 plain bearings.
ADVANTAGES OF KS PERMAGLIDE® P10 PLAIN BEARINGS
- Protected from tribo-chemical corrosion
- Low operating bearing clearance
- Low level of wear, even with alternating stresses
- Low friction coefficient
DESCRIPTION OF MATERIAL
KS Permaglide® P10 is a universal plain bearing material for both dry and lubricated applications. The composite, multi- layered material excels thanks to its high rigidity, durability, high chemical resistance and good emergency running properties. These characteristics are achieved to a great extent through the use of lead bronze sintered onto a steel base, and friction-lowering additives of fluoropolymer PTFE and the metal lead.